Rudder Installation - Hobie Mirage Lynx Manual

Rudder Installation

10
Rudder Installation/Removal
1
Align the track on
the rudder system
with the track on the
gudgeon that is
mounted to the back
of the kayak.
2
Slide the rudder
track into the gud-
geon track making
sure the red pin
locks.
3
To remove the rud-
der, pull the red
locking knob out
while pulling the
rudder up.
NOTE: Your rudder pin is
designed to break under high
loads. An extra pin is stored
inside a small pocket on the
back of your seat.