La Crosse Technology S81120v2 Setup Manual page 6

TEMPERATURE & HUMIDITY
Viewing Your Temperature & Humidity Data
Indoor/Outdoor Readings
If you wish to see both indoor/outdoor data,
press the PLUS (+) button until the Cycle
Mode Icon appears. Your display will now
automatically alternate between indoor and
outdoor data.
1. OUTDOOR TEMPERATURE
Current Outdoor Temperature
2. TH SENSOR RECEPTION ICON*
Appears if readings are provided by an add-on
TH sensor
3. Cycle Mode Icon
Indicates if the indoor/outdoor data is set to cycle
4. HI/LO OUTDOOR TEMPERATURE ALERTS
Appears if a temperature alert is set and active
5. OUTDOOR HUMIDITY
Current Outdoor Humidity
6. HI/LO OUTDOOR HUMIDITY ALERTS
Appears if a humidity alert is set and active
7. "FEELS LIKE" TEMPERATURE
Based on current outdoor temperature and
wind speed (heat index & wind chill)
*An add-on Thermo-Hygro (TH) Sensor must be connected
to view readings separate from you Breeze Sensor.
1
4
2
3
7
Outdoor Temperature & Humidity Display
Indoor Temperature & Humidity Display
"Feels Like" Temperature
This reading indicates either Wind Chill or Heat index
values when conditions have been met.
• Wind Chill: When temperature is below 50°F and
there is 5+ MPH sustained wind speed.
• Heat Index: When temperature is above 80°F.
• Current Temperature: When the temperature is
between 41°F and 79°F, the reading will remain
the same as the outdoor value regardless of
humidity or wind speed.
TEMPERATURE & HUMIDITY
Temperature & Humidity Records and Alerts
Viewing Records
5
Press the TEMP button to toggle through
indoor/outdoor temperature & humidity
records with time and date stamps.
Records Viewing Order
6
• Outdoor High Temperature
• Outdoor Low Temperature
• Outdoor High Humidity
• Outdoor Low Humidity
• Indoor High Temperature
• Indoor Low Temperature
• Indoor High Humidity
• Indoor Low Humidity
• "Feels Like" High Temperature
• "Feels Like" Low Temperature
• Dew Point
Resetting Individual Temperature
and Records
1. Press the TEMP button to view the
individual temperature & humidity
values you'd like to reset.
2. Next, hold the MINUS (-)
3. This reading is now reset to your
current temperature or humidity value.
09
Setting the Temp. & Humidity Alerts
1. Hold the ALERTS
Alert Settings Menu.
2. Use the +/- buttons to turn alerts on/off
and to adjust specific alert values. Press
the ALERTS button to confirm your
selection.
3. Your alert is active when the icon (HI alert)
and/or icon (LO alert) is on.
The alert icons will appear on the temperature &
humidity section of the LCD when active.
Important Notes:
• The alert is defaulted to be off.
• When the armed alert value is reached, the station
button.
will beep and the icon will flash. Press any button
to stop the alert sound.
• The Alert Icon will remain flashing until the
current conditions are no longer within the set
alert range.
button for to enter the
10