La Crosse Technology S81120v2 Setup Manual page 3

BASICS
Station Settings
When the station is first powered on, a greeting will appear on the LCD display
and then your station will move into the Settings Menu.
To enter the Settings Menu after the initial setup, hold the
side of your station.
Settings Menu Order
Greeting • Language • 12/24 Hour Time
Date • Month/Date or Date/Month Order
(MPH or KMH) • Wind Direction (Letters or Degrees)
Use the +/- buttons on the Press the
side of the station to adjust confirm your selection and
the values. move to next step.
Notes: Weekday will set automatically after year, month, & date settings are adjusted.
*Rainfall data is only available when a compatible rain sensor is connected.
See page 13 for more information.
SET button on the
• Hour • Minutes • Year • Month
• Fahrenheit/Celsius • Wind Speed Units
• Rain Units (IN or MM)*
SET button to You may exit the Settings
Menu at any time by
pressing the LIGHT
BASICS
Buttons
1. LIGHT
Press to adjust backlight.
Hold to enter Auto-Dim
Settings.
3. RAIN*
When viewing Rain, Press
RAIN to view rain history
month, year etc. Hold
to search for Rain sensor.
Hold RAIN and SET
to return to Time display.
5. PLUS (+)
Press to toggle indoor/
outdoor temperature &
humidity readings. Use to
adjust values in Settings
Menu.
7. TEMP
Press to view HI/LO
temperature and humidity
records. Hold to search for
add-on TH sensor.**
button.
*Rainfall data is only available when a compatible rain sensor is connected.
See page 13 for more information.
**Add-On Temperature & Humidity data is only available when a separate TH sensor is added.
03
See page 11 for more information.
2. WIND
Press to view Wind Speed
History. While viewing, hold
the MINUS button to reset
the history reading.
4. SET
Hold to enter Settings Menu.
Press to toggle full weekday
RAIN or month/date/year.
together
6. MINUS (-)
Hold to reset history readings.
Use to adjust values in Settings
Menu. Hold to delete add-on
TH sensor.**
8. ALERTS
Hold to enter the Alerts Settings.
While viewing, use the +/-
buttons to activate an alert and
the ALERTS button to confirm
and move to the next option.
1
2
3
4
5
6
7
8
04