Using The Camera - Stealth Cam CORE STC-Z3IRTL Instruction Manual

Table of Contents

Advertisement

USING THE CAMERA

Once all program settings have been setup properly, your Stealth Cam is ready
for field use.
Getting started
Listed below are some helpful pointers on how to use your camera to get the
best results.
Mount the camera about 4-5 feet high with the camera pointed at a slight
downward angle.
Mount the camera facing north or south, NOT east or west due to the
rising and setting of the sun could produce false triggers and overexposed
images.
If you're covering a trail, face the camera down or up the trail. Most
commercial cameras take 1-3 seconds to sense motion/heat and take a
picture.
Clear out any brush or weeds in front of camera. This will cause false
pictures caused wind or high temperature days.
Double check battery before turning on the camera for use.
Make sure to insert the memory card after setting up the game camera.
Make sure to turn the camera ON (or take out of Test Mode) before you
leave.
Verify time and date is correct.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
24

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Core stc-z3irtlnxt

Table of Contents