Frequently Asked Questions - Sony PCG-R505GCP Primary User Manual

✍
To avoid losing data, do not push the Eject button when the LED indicator is on.
Removing a Floppy Disk

Frequently asked questions

Why doesn't the Safety Remove Hardware icon
when the drive is connected?
The computer does not recognize that the floppy disk drive is connected to the
computer. First, make sure the USB connector is properly inserted into the USB
port. If you need to secure the connection, wait a few moments for the computer
to recognize the drive. If the icon still does not appear, follow these steps:
1 Close all open programs to avoid data loss.
2 Eject the floppy disk from the floppy disk drive.
1 Close all programs that were opened from the disk and wait for the LED
indicator to turn off.
2 Push the Eject button, and remove the disk.
3 Reconnect the floppy disk drive.
1 Close any active programs to prevent data loss.
2 Insert the USB connector (with the USB icon
USB port .
Using Floppy Disk Drives
E j e c t b u t t o n
appear on the taskbar
facing upward) into the
99