Connecting A Parallel Port Printer - Sony PCG-R505ELP VAIO User Guide (primary manual) User Manual

Connecting a Parallel Port Printer

If your computer came with a docking station, you may connect a Windows
station. However, if your computer did not come with a docking station, see
connecting a printer to your computer.
Turn off the computer before connecting peripherals. In normal use, you should turn on the peripherals before turning
on your computer.
To connect a parallel port printer
1.
Locate the Printer port, identified by the
2.
Plug the printer cable (may or may not be supplied by printer company) into the Printer port.
3. Make sure the Printer setting in the Sony Notebook Setup software is properly set. See
Notebook Setup Screen
4.
See the manual supplied with your printer for more information on its installation and use
Connecting a Printer to the Docking Station
If your printer stops functioning after resuming from a power saving mode, see
more information.
symbol, on the docking station.
for more information.
compatible parallel port printer to the docking
®
Connecting a USB Printer
Displaying the Sony
Troubleshooting the Printer
for information on
for
Page 52