How To Use (Rice Cooking) - Panasonic SR-MVN187 Operating Instructions Manual

HOW TO USE (Rice Cooking)

1
Measure rice with the Measuring Cup provided
(Refer to the Specifications table on page 10).
Correct
2
Rinse the rice.
• Rinse the rice in a separate bowl until water is
relatively clear.
• Do not rinse the rice in the provided Pan as non-stick
coating may be damaged.
• Pour the washed rice into the Pan.
Bowl
3
Pour in the desired amount of water.
• Set the Pan on a flat surface when adding the water.
• Add water according to the Water Level Indicator on the
Pan. (For example: To cook '6' cups of rice, add water
to Water Level Indicator '6'.)
• Hot water is not recommended for cooking as it may
result in soggy rice.
Water Level
Indicator
The Water Level Indicator of the Pan is for reference.
Adjust the amount of water to personal taste. Level the rice
evenly after water adjustment is completed.
NOTE:
• Soak rice in water at least for 30 minutes for better
rice cooking.
4
Place the Pan into the Body.
• Make sure that the Pan is directly in contact with Cast
Heater by turning it slightly to the right and to the left
until it sits properly in order to avoid overflow or
uncooked rice.
Cook Keep
Warm
NOTE:
• If the outer side of the Pan is wet when placed into the
Body, it may cause a cracking noise when the
appliance heats up.
• This may damage the appliance, so make sure that the
outside of the Pan is in dry condition before use.
5
1 Close the Outer Lid firmly, the 'click' sound
will be heard.
• Make sure that the Inner Lid and the Steam Cap
• If the Outer Lid is not closed securely, the cooking
2 Attach the Socket to the Cooker Socket, plug
in to the power supply source and switch ON.
Incorrect
• Do not plug in until just before start to cook.
1
6
Press the Switch Button down, the 'click' sound
will be heard.
• The Keep Warm Indicator will light up when power
supply source is ON.
• The Cooking Indicator will light up indicating that rice
cooking has been started.
NOTE:
• If the Pan is not placed in Body, the Switch Button
cannot be engaged when press down.
MAXIMUM LEVEL
• Be aware of the hot steam comes out from the Steam
Do not cook more
Cap on top of the Outer Lid during cooking.
than this amount.
• Do not cover the Outer Lid with a cloth or anything during
(eg: 1.8 L type)
cooking or keep warm because deformation or
discoloration may occur.
7
After the rice is cooked.
• When the cooking is completed, the Switch Button will
pop up. At the same time, the Cooking Indicator will go
off and the Keep Warm Indicator will light up indicating
that the keep warm function has been taken place.
• Cooking actually continues during the first 15 minutes of
keep warm. Therefore the Outer Lid should remain
closed even after the cooking process is completed for
at least 15 minutes.
• Then mix the rice well with Rice Scoop to allow water
vapor to escape.
• When user do not wish to keep warm, switch OFF the
power supply source and unplug.
are properly attached.
efficiency will be affected.
2
Cook Keep
Warm
Socket
Keep
Cook Warm
Power
Plug
5