Software; Hardware Connection; Serial Communication Connection; Ethernet Communication Connection - Hughes HN Series Interface Manual And Reference

2.2. Software

Path
Main Window → HelpVersion info.
Level 0
Be sure that the Remote Client, ROM, and device module are at or above the versions shown below:

2.3. Hardware Connection

Serial Communication Connection

Serial connection is not an option for the hardware associated with this module.

Ethernet Communication Connection

Connect the AAQ antenna controller to the Hughes HN modem/router via one of the three LAN ports on the rear of
the CIP. The AAQ controller supports Ethernet communications to the modem/router
Hughes HN

Figure 2 - Version Info

4