Before First Use; Settings - AEG L7FEC48S User Manual

Table of Contents

Advertisement

20
www.aeg.com
7.2 Woolmark Apparel Care -
Blue
The wool wash cycle of this machine has
been approved by The Woolmark

8. BEFORE FIRST USE

1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.

9. SETTINGS

9.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the
simultaneously until the indicator
comes on/goes off on the display.
You can activate this option:
• After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
• Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
9.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
and the
buttons
Company for the washing of wool
garments labelled as «hand wash»
provided that the garments are washed
according to the instructions issued by
the manufacturer of this washing
machine. Follow the garment care label
for drying and other laundry instructions.
M1623
In UK, Eire, Hong Kong and India the
Woolmark symbol is a certification
trademark.
4. Pour a small quantity of detergent
into the compartment marked by
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals, touch the
simultaneously for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
.
and the
buttons

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents