Carrier XCT 7 40VCC727FQEE Operation & Installation Manual page 38

3.6.3 Current Pre-Alarm
The early warning query is mainly used to check the threshold alarm set in the system. The early warning
parameter setting can be set by your setting through the service manual. When the parameter value exceeds
the setting range, an alarm can be issued.
Note: The setting of the threshold alarm can be adjusted by itself, and the reported warning and fault are
independent of each other. The reported warning will not cause the shutdown of the equipment. Please
make your own Settings as required.
③
②
④
①
① For the query option, click "Current fault/Historical failure/Current Pre-Alarm/History Pre-Alarm"icon
② select the query gateway, can choose all gateways, when all gateways selected, display all the current
alarm, can also choose to develop the bus gateway address warning, select only after screening the warning,
convenient screening system warning.
37