Getting Started - Shark NV44 Owner's Manual

Getting Started

a c
f
b
d
Along with your upright unit, you
will find the following components:
a
Vacuum Body
b Motorized Floor Brush
c
Handle Assembly
d
Super Stretch Hose
e
Cleaning Wand
f
Power Brush
g
Cleaning Attachments
4 TOLL FREE: 1-800-798-7398
NV44_26_IB_E_130124_1.indd 4
e*
g
2
Your Shark Navigator
®
Upright is easy to assemble:
1
Lay your vacuum body on a
level surface.
2
Slide the electrical connection
from the motorized floor brush
into the main body to click into
place.
3
Connect the hose from the
main body to the motorized
floor brush; push with a slight
turning motion to create a snug
fit.
4
5
3
Plus 4
® Slide the handle assembly
into the upright unit aligning
the hose hook on the handle
assembly with the power cord
hooks on the back of the unit.
5 Secure the handle assembly in
place with included nut/bolt
(shipped attached to handle
assembly).
6 Place the vacuum in the upright
position.
7
Store the Crevice Tool, Dusting
Brush and Cleaning Wand on
the unit.
7
13-01-24 11:35 AM