Connecting The Camera To Lan/Wlan - Airlink101 AICN1777W User Manual

Wireless n mpeg4 night vision pan/tilt network camera

Hide thumbs Also See for AICN1777W:

Table of Contents

2.2 Connecting the Camera to LAN/WLAN

Use the provided Ethernet cable to connect the camera to your local area network (LAN). When you

connect the AC power adapter, the camera is powered on automatically. You can verify the power status

from the Power LED on the front panel of the camera. Once connected, the Link LED starts flashing

green light and the camera is on standby and ready for use now.

Connecting the Ethernet Cable

If you use a wireless network in your application environment, you need to attach the included external

antenna to the camera. When the camera is powered on, the camera will automatically search any

access point with "airlink101" SSID.

Connecting the External Antenna

NOTE

If the camera cannot connect to your wireless network, you need to

first install the camera in LAN and then proceed with WLAN settings.

- 8 -

Table of Contents

Skyipcam1777w