WiFi Protected Setup
Wi-Fi Protected Setup™ (WPS) is a new and easy way to configure the encryption for
your wireless network clients to connect to the router. Your wireless adapters must
support WPS in order to use this convenient function. If your wireless adapters do not
support WPS, you will need to set up the wireless security manually and you can skip
this section.
In the instructions below, we are going to use the utility Wireless Monitor that comes
with the Airlink101 Wireless 300N adapters, and AR690W Wireless 300N Gigabit
Router as the example.
Step 1
Go to the computer with the Wireless 300N adapter and open the Airlink101
Wireless Monitor. Click on the WPS Connect button.
Note: If you do not see the WPS Connect button, you can go to
www.airlink101.com to download the latest utility and driver.
21