Table of Contents
Advertisement
LEDs
Status
Status
Blinking (Green)
On (Green)
On/Sleep
Off
On (Green)
WAN
Blinking
On (Green)
LAN 1~4
Blinking
On (Green)
Blinking
Wireless
Blinking Rapidly
Off
Button
Description
Reset router to factory default settings or start security
synchronization function (WPS). Press this button and
Reset/WPS
hold for 6 seconds to restore all settings to factory
default. Press this button and hold no longer than 1
second to start security synchronization.
WLAN On/Off
Switch on/off router's wireless feature.
B. Back Panel
Description
Device status is working properly
Router is on.
Router is at power saving mode.
Network device is connected
Data access
Network device is connected
Data access
Wireless feature is enabled
Data access
Device is in WPS PBC mode
Wireless feature is disabled
2
Item Name
Description
Antennas
These antennas are detachable 3dBi dipole antennas.
ON/OFF
Switch on/off the router.
1 - 4
Local Area Network (LAN) ports 1 to 4.
WAN
Wide Area Network (WAN / Internet) port.
PWR
Power connector, connects to A/C power adapter.
Section 2
Configuring the Router
Note:
Prior to connecting the router, be sure to power off your
computer, DSL/Cable modem, and the router.
Step 1
Connect one end of a network cable to the WAN port of the router
and connect the other end of the cable to the DSL/Cable modem.
Step 2
Power on the modem.
3
Advertisement
Table of Contents
