Record Audio - Adobe 65021048 User Manual

Record audio

After you set up the audio hardware on your computer and specify the input audio device in Premiere Pro Audio
Hardware Preferences, you're ready to record.
1 Make sure that the input device (microphone or other audio device) is connected properly to the computer.
In the Audio Mixer, click the Enable Track For Recording icon
2
audio.
3 (Optional) If necessary, add an audio track appropriate for the number of channels you will record. For example,
if you're recording voice with a single monaural microphone, you should record to a mono audio track. See
with tracks" on page 104.
4 Choose the recording input channel from the Track Input Channel pop-up menu.
Note: The Track Input Channel pop-up menu appears after you click the Enable Track For Recording icon.
Repeat steps 3 and 4 as necessary if you're recording to multiple tracks.
5
6 (Optional) Create a new sequence.
Note: It's also possible to record to an existing sequence. Doing so is useful for recording voice-overs. You can record
your voice while watching the playback of the sequence. When you record voice-overs to an existing sequence, it's good
practice to click the Solo Track icon
mutes the other audio tracks.
7 (Optional) Select the audio track that you want to record to.
(Optional) Adjust the levels on the input device to achieve the proper recording level.
8
9 Click the Record icon at the bottom of the Audio Mixer to enter Record mode.
Click the Play button
10
11 If necessary, adjust the track volume slider up (louder) or down (quieter) as you record to maintain the monitor
level you want.
The red indicators at the top of the VU meters light up if the audio is clipped. Make sure that the audio level isn't
loud enough to cause clipping. Generally, loud audio registers near 0dB, and quiet audio registers around -18dB.
Click the Stop icon to stop recording.
12
The recorded audio appears as a clip in the audio track and as a master clip in the Project panel. You can always
select the clip in the Project panel and rename or delete it.
Mute input during recording
Muting input can prevent feedback or echo when the computer is connected to speakers.
Choose Edit > Preferences > Audio (Windows) or Premiere Pro > Preferences > Audio (Mac OS).
1
Select Mute Input During Timeline Recording.
2
in the Audio Mixer for the track that you're recording to. Clicking the icon
to start recording.
April 1, 2008
ADOBE PREMIERE PRO CS3
for the track into which you want to record
197
User Guide
"Work