Horizontal Ruler; Vertical Ruler - Adobe 22011292 - Audition User Manual

CHAPTER 4
40
Navigating the Edit View
Left-click and drag the magnifying glass (which appears when your mouse passes over the edge of the Horizontal
•
Portion Bar's "handle") to change the viewable range of the Wave Display. Moving the magnifying glass to the left
zooms in, while moving it to the right zooms out.
Right-click anywhere on the Horizontal Portion Bar to call up a menu with three zooming options: Zoom In, Zoom
•
Out, and Zoom Full. The menu also has options for moving the Horizontal Portion Bar to the bottom of the Wave
Display, as well as returning it to its default position at the top of the Wave Display.

Horizontal Ruler

The Horizontal Ruler runs along the bottom of the Wave Display and acts as a timeline. It measures time in the same
format specified in the View > Display Time Format menu (which is hours, minutes, and seconds by default).
Horizontal Ruler
Left-click on the Horizontal Ruler and drag the little hand over the ruler to scroll time-wise through the session.
•
Right-click on the Horizontal Ruler and drag to select an area to zoom in on. The zoom in occurs when the right
•
mouse button is released.
Right-click anywhere on the Horizontal Ruler to call up a menu with several options.
•
Display Time Format
Snapping allows the edges of any block to "snap" to certain time locations when being dragged. Check the
Snapping
snapping behavior(s) desired.
Six zoom commands are provided here: Zoom In, Zoom Out, Zoom Full, Zoom to Selection, Zoom In to Left
Zooming
Edge of Selection, and Zoom In to Right Edge of Selection.

Vertical Ruler

The Vertical Ruler – at the right edge of the Wave Display – shows the relative amplitude of a waveform over time.
Vertical Ruler
This submenu allows you to choose the time format the Horizontal Ruler uses.