Table of Contents
Advertisement
Inserting a battery
To insert a battery
1.
Push the battery bay cover down to open it. The battery bay cover swings out but does not detach from the
computer.
Opening the Battery Bay
2.
Slide the battery into the battery bay. If the computer is on, it automatically detects the battery.
Inserting a Battery
3.
Push the battery bay cover up until it clicks into place.
If the port replicator is attached to your computer, do not insert or remove the battery. Lifting and turning the
computer with the port replicator attached could cause a temporary loss of power.
For some software programs and some peripheral devices, your computer may not enter Hibernate mode when the battery
life is low. To avoid loss of data when using battery power, you should save your data frequently and manually activate a
power management mode, such as Standby or Hibernate. See
Using power saving modes
for more information.
Page 7
Advertisement
Table of Contents
Troubleshooting
