Table of Contents
Advertisement
Connecting a projector
You can use a projector to display the actions and images on your computer's LCD screen.
To connect a projector
1.
Plug the projector into an AC outlet.
2.
Turn off the computer.
3.
Plug the display cable connector into the AV Out jack on the computer.
4.
Plug the other end of the display cable into the projector.
5.
Plug the audio cable connector into the Headphone jack
6.
Plug the other end of the audio cable into the projector.
7.
Turn on the projector (if it is not already on), and then turn on the computer.
8.
Press the Fn+F7 key combination to toggle the display between your computer and the projector. See
a Display Mode
for more information.
Connecting a Projector
See the manual that came with your projector for more information on its installation and use.
on the computer.
Selecting
Page 102
Advertisement
Table of Contents
Troubleshooting
