Operation - Midland PRO901 Instruction Manual

Operation:

Power On/Off:
Once professionally installed -
Rotate the Knob to the right to turn on.
You will hear a tone to indicate that the radio is on.
The LCD display will show all icons for one second and then display the most recently
selected channel.
When the radio is on, turn the knob counter clockwise all the way to turn off.
The LCD display will go blank when the radio turns off.
Adjusting the Volume:
Turn the Volume knob clockwise to increase the volume or turn the Volume knob counter
clockwise to decrease the volume.
Selecting an Active Channel:
IMPORTANT!
To communicate between two radios, both radios must be set to the same channel.
Be sure the radio is turned on (See Power On/Off)
1. Press and release the Channel Up button ▲ (11) or the Channel Down button ▼ (12) on the
microphone to scroll through the available channels.
2. Press and release the SCAN button (7) to rapid scan to find active channels.
The Channel icon on the LCD display will show the active channel.
6