Averaging A Marked Location - Garmin Astro DC 40 Owner's Manual

3. To edit location information,
select the appropriate field, and
press ENTER to open the on-
screen keypad. After entering and
confirming your changes, select
OK (on the keypad).
4. Select OK to mark the location.
navigating to a Marked
Location
from settings...
Go To Marked Location–provides
directions to a location you have
marked (page 14).
Editing a Marked Location
1. Press MENU > MENU.
2. Select Advanced > Find >
Marked Locations.
3. Select the location you want to edit.
4. Enter your changes using the on-
screen keypad.
Astro and DC 40 Owner's Manual
Moving a Marked Location on
the Map
1. Press MENU > MENU.
2. Select Advanced > Find >
Marked Locations.
3. Select the marked location you
want to edit.
4. Select Map to show the marked
location on the map.
5. Press ENTER to place a MOVE
marker next to the marked location.
6. Use the Rocker to move the
marked location to a new location
on the map.
7. Press ENTER.
Averaging a Marked
Location
You can average a marked location
for more accuracy. When averaging,
the Astro takes several readings at the
same location and uses the average
Mark Location