Playback A Tape - Panasonic OmniVision PV-V4621 Service Manual

Playback a Tape

EJECT
REW
PAUSE/
SLOW
Playback using VCR controls
POWER CHANNEL VCR/TV
Multi Function
Display
Press STOP/EJECT to stop and/ or
eject tape.
14
PLAY
FF
STOP
.
1
Insert a tape
2
Press PLAY.
PLAY
REW FF
STOP/EJECT
REC
Ready Check List
All connections are made (pg. 8, 10, 22).
TV and VCR are plugged in.
TV is on and tuned to CH3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR)
1
Insert a tape,
• VCR power comes on.
"VCR" lights on Multi Function Display.
2
Press PLAY*
to play tape.
• If tape has no rec. tab (pg. 4), auto play begins.
Special Features During Play
Forward/ Reverse scene search
--> Press FF or REW.
--> Press again or PLAY to release.
Still (Freeze) picture
--> Press PAUSE/SLOW.
--> Press PLAY to release.
Frame by Frame picture
--> Press PAUSE/SLOW in Still mode.
--> Press PLAY to release.
Slow Motion picture
--> Hold down PAUSE/SLOW in Still mode.
--> Press PLAY to release.
• These features work best in SP or SLP
Notes
mode.
• The sound will be muted.
• To reduce picture noise, see "Manual
Tracking Control" on page 35.
• After the VCR is in Still or Slow mode for 3
minutes, it will switch to Stop mode
automatically to protect the tape and the
video head.
3
Press STOP
to stop tape.
Rapid Rewind/FF
Press REW or FF in Stop mode
to Rewind/ Fast Forward tape.
• Rewind your tape in approximately one
minute when using a T-120 tape.
Press EJECT on remote,
or STOP/EJECT on VCR to eject tape.
Note
Remove loose or
peeling labels from tapes
to prevent tape jam.