Table of Contents
Advertisement
Air shroud removal and installation
Removing the air shroud
You need to remove the air shroud to perform the following procedures:
CAUTION:
Always operate your server with the air shroud installed to ensure reliable and continued operation.
Follow these steps:
1.
Remove the cover plate (see "Removing the cover plate" on page 45). .
2.
Remove the two screws (
3.
Lift the air shroud (
Installing the air shroud
Follow these steps:
1.
Position the air shroud so that its tabs align with the screw holes (
2.
Secure the air shroud to the mainboard with two screws (
CAUTION: Do not pinch or unplug cables that may be near or under the air duct.
46
) from the mainboard.
) from the server node.
) on the server node.
).
Chapter 7
Advertisement
Table of Contents
