Electrical Connection - ABB ACx580-01 Series User Manual

12 Guide on Installation and Debugging of Filters

Electrical connection

 S1...S4
No.
1
2
3 A1/B1/C1/A2/B2/C2
4
5
S5...S6

5
No. Terminal No.
1 U1/V1/W1
2 U2/V2/W2
3 A1/B1/C1/A2/B2/C2
4 T1/T2
5
*For the use of bypassing the filter branch, after removing the short wiring of A1-A2, B1-B2, and C1-C2,
the user selects the appropriate control contactor according to the I
information.
*Overheating protection terminals T1- T2 can be connected to the frequency converter as overheating
protection signals. In the normal state, it is normally closed. When the temperature limit of the
overheat protection is reached, the state will turn to off.
Terminal No.
U1/V1/W1
U2/V2/W2
T1/T2
3
2
1
5
PIHF filter input terminal
PIHF filter output terminal
Filter branch bypass control terminal of PIHF filter (external
contactor control)
Overheat protection switch terminal
Protective earthing
Description
PIHF filter input terminal
PIHF filter output terminal
PIHF filter loop control terminal (external contactor
control)
Overheat protection switch terminal
Protective earthing
4
Description
current value in the selection
filter