Table of Contents
Advertisement
SATA Controller Configuration
Parameter
Onboard SATA Controll
OnChip SATA Type
SATA Port 0/1/2/3/4/5
Description
When enabled, the SATA controller will
function normally.
Select the on chip SATA type.
IDE: When set to IDE, the SATA controller
disables its RAID and AHCI functions and
runs in the IDE emulation mode. This is not
allowed to access RAID setup utility.
RAID: When set to RAID, the SATA controller
enables both its RAID and AHCI functions.
You will be allows access the RAID setup
utility at boot time.
ACHI: When set to AHCI, the SATA controller
enables its AHCI functionality. Then the RAID
function is disabled and cannot be access
the RAID setup utility at boot time.
Displays the installed HDD devices.
41
Option
Enabled
Disabled
IDE
RAID
ACHI
Advertisement
Table of Contents
