Power Supply LEDs
The Altos S700 Series uses two AC power supplies. The AC power
supplies provide 853W peak output power and 673W continuous
output power.
The Altos S700 Series power supply has two LED indicators on it, which
are visible from the rear of the enclosure. The green Power OK LED is
on when the power supply is operating normally. This green LED is
driven by the power supply, and indicates that the power supply
output voltages are operating normally. The power supply amber Fault
LED is driven by the LS Module and power supply. This amber LED is ON
when the LS Module detects a power supply fault, or it will flash, when
the power supply Locate feature is selected.
Note: If enabled, the audible alarm will sound when an error is
detected
Figure 5-3 Power Supply LEDs
67
Fault LED
Power OK