Figure 3-3 Daisy chaining dual FC Loop enclosures
To HBA
To next
enclosure
See Appendix C for Loop Diagram.
Caution: When daisy chaining enclosures, you must ensure that
each enclosure has a unique Enclosure ID.
Quad Loop Configuration
Note: Quad loop configuration requires that the enclosure be
configured in split loop mode. To set split loop mode, a jumper
must be installed at jumper location JP3 on each LS module in the
enclosure.
1
2
1
2
35
To HBA
1
2
1
2
To next
enclosure