Load Status Display Function - Samsung RL44Q Series Service Manual

TROUBLESHOOTING 5. SELF DIAGNOSIS & TROUBLE SHOOTING

4-1-1-3) Load Status Display Function

1) When the "Menu + Operation" buttons are held down together for 6 seconds during the normal
operation, the Fridge and Freezer temperature LEDs will blink for 4 seconds at an interval of 0.5
sec.
2) At this time, when taking your fingers off the "Menu + Operation " buttons and pressing the Select
button (sending out a "Ding-Dong" sound, it goes into the Load Status Display function.
3) The Load Status Display mode shows the loads which MICOM sends out operational signals to.
It only means that there are operational signals from MICOM. So, it does not indicate that those
signalled loads are in operation. And, even though a specific part is displayed as in-operation, it
may not operate due to its own defect or the defective relay on PCB.
4) The Load Status Display lasts for 30 seconds and it goes back to the normal operation mode.
5) The 7-Segment Load Status is as follows.
➀
➁
HOLD 6 SEC
Fridge (R)
Freezer (F)
41