Table of Contents
Advertisement
20
Appendices
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Problems and Solution
#
Problem
1
The projector stops
responding to all
controls
2
Image or projector
problems
3
USB/SD read fail
4
USB drive fail
5
Media file not
found or can't be
opened in file list
Solution
If possible, turn off the projector, then unplug
the power cord and wait at least 30 seconds
before reconnecting power.
Please refer to projector CD manual's
troubleshooting.
Please make sure the USB device or SD card is
good and well inserted. Remove to try for
several times if necessary.
USB does not support USB hub function and
which power consumption is over 500mA.
The files by un-supported codec won't be shown
on file list. Please check the media support table
again in this manual.
Advertisement
Table of Contents
