Miele KM 3054-1 Installation Manual page 10


Risk of explosion due to
damaged gas pipes.
Gas can leak from damaged flexible
gas pipes.
Attach flexible gas pipes in such a
way so that they do not come into
contact with any moving kitchen
parts (e.g. a drawer) and are not
exposed to mechanical stress.
Connect the hob to the gas supply in
accordance with national and local
regulations. Check the gas
connection for any leaks.
Depending on country of destination
this appliance is set up for connection
to natural or liquid gas. See adhesive
label on the appliance.
Depending on country of destination,
jets are supplied for conversion to a
different type of gas. If the appropriate
jets have not been supplied with the
appliance, you will need to contact your
Miele dealer. Conversion to another
type of gas is described in the section
"Converting to another type of gas".
11199440-01
Connecting the hob
The hob is supplied with a conical ¹/₂"
gas connection point. There are two
connection options:
- Fixed connection
- Flexible connection in accordance
with DIN 3383 Part 1, maximum
length 2000 mm.

Risk of explosion due to gas
leakage.
Unsuitable sealant will not ensure the
required leak protection for
connections.
Ensure that a suitable sealant is
used.
Using a 90° angle
c Connection R ¹/₂"
d 90° elbow
The installation height in the area of
the gas connection is increased by
approx. 60 mm.
Installation