5 IBM (AIX) servers and workstations
For supported versions of AIX, see http://www.hp.com/go/connect.
Identifying attached devices
For SAS, to list existing devices, use the following:
% lsdev -C |grep SAS
This produces output similar to:
hdisk0
hdisk1
rmt0
sas0
sas1
ses0
ses1
ses2
sissas0
sissas1
Configuring the device files
Reboot the server/workstation with the tape drive attached and powered on.
If you are using a graphics terminal running X-Windows
1.
At a Windows terminal, type:
nl
smit tape
2.
The following window is displayed:
Select "change/show characteristics of a tape drive"
Available 00-08-00 SAS Disk Drive
Available 00-08-00 SAS Disk Drive
Defined
03-08-00 Other SAS Tape Drive
Available 00-08-00 Controller SAS Protocol
Available 03-08-00 Controller SAS Protocol
Available 00-08-00 SAS Enclosure Services Device
Available 00-08-00 SAS Enclosure Services Device
Available 00-08-00 SAS Enclosure Services Device
Available 00-08
Available 03-08
Volume 5: UNIX, Linux and OpenVMS configuration guide
PCI-X266 Planar 3Gb SAS Adapter
PCI-X266 Ext Dual-x4 3Gb SAS Adapter
21