Siemens SIMATIC HMI OP 77B Operating Instructions Manual page 28

& R Q Q H F W L Q J W K H 2 3   %
After loading the operating system, the HMI device
automatically switches to Transfer mode and the
Transfer dialog opens:
Figure 4–9 Transfer dialog
Note
When the HMI device is restarted, it is possible that a
project already exists on the HMI device; in which case
Transfer mode is not called in but the project is started.
Exit from the project. The Loader then reappears.
ESC
Press
 
After canceling, the Loader appears:
Loader
Transfer
Start
Infos/Settings
Figure 4–10 Loader
Switching off the power supply to the HMI device.
 
4–10
Release 03/2004
B 7.0.0.xx
Operating Instructions (Compact) OP 77B
6AV6691-1EA01-0AB0