Zte Telstra MF985T User Manual page 15

 WPS is enabled for 2 minutes once pressed and the device LED's will flash to
indicate WPS mode.
 If you have enabled PIN mode then you need to enter the same PIN on devices
you wish to connect.
 Press the Help icon
SETTINGS > DEVICE SETTINGS > ACCOUNT
MANAGEMENT
 Use the Account Management settings to change the administrator password if
required.
 The default password is password. If you have changed and forgotten the
password then you need to restore the device to factory defaults:
1. With the device switched on open the SIM slot cover and locate the reset
button next to the SIM slot.
2. Using an item such as a paperclip or pin press the "Reset" button briefly until
the LED's go out.
3. The device will re-start with factory default settings.
 Press the Help icon
to get in context tips
to get in context tips
Page 15 of 29