Husqvarna K770 SmartGuard Workshop Manual page 34

3. Remove the carburetor from the bracket.
4. Pull off the hose from the carburetor and divide the
units.
34 - Repair and servicing
6.6.2 To disassemble the guides
1. Remove the support insert.
2. Push out an edge of the guides, then push them out
by hand.
6.6.3 To examine the inlet system
Dust can decrease the life of the engine. Dust on the
inner side of the seals means there are defective or
incorrectly installed components.
• Look for leaks. Make sure the rubber guides are not
cracked.
1453 - 001 - 02.04.2020