Removing the Converter Board
1.
Remove the front bezel and LCD panel by following the procedure described on page 28.
2.
Disconnect the converter board cable from the system.
3.
Remove the screws securing the converter board; then remove the converter board from the system.
Quantity
2
A circuit board that is >10 cm
image. Follow local regulations for disposing this type of circuit board.
40
Color
Torque
Silver
4.5 ± 0.5 kgf-cm
2
has been highlighted with a yellow rectangle as shown in the above
Veriton Z2610G/Z2611G/Z2620G/Z2621G AIO Computer Service Guide
Part Number
86.7A554.6R0