Advertisement
Cable coming from the control box / 从电气箱连接出来的电缆
Brown
褐色
Brown: Switch terminal 1 / 褐色 : 开关端子 1
Light blue: Switch terminal 3 / 浅蓝色 : 开关端子 3
3) Connect the cable coming from the control box and the one coming from the plug to main body 2 of the switch as
shown in the fi gure.
3) 如图所示那样，把从电气箱和插头连接过来的电缆连接到开关主体 2 上。
1
4
Control box /
电气箱
SEWING MACHINERY BUSINESS UNIT
2-11-1, TSURUMAKI, TAMA-SHI,
TOKYO, 206-8551, JAPAN
PHONE : (81)42-357-2371
FAX : (81)42-357-2380
http://www.juki.com
Copyright C 2011 JUKI CORPORATION
• All rights reserved throughout the world.
• 版权所有，严禁擅自转载、翻印本书的内容。
Light blue
浅蓝色
Light blue
浅蓝色
2
4) Connect the cables (green/yellow) coming from the
4) 如左图所示那样，请把从电气箱和插头连接过来的地
5
Plug /
插头
Please do not hesitate to contact our distributors or agents in your area for further information when
necessary.
＊ The description covered in this instruction manual is subject to change for improvement of the
commodity without notice.
对本产品如有不明之处，请向代理店或本公司营业部门询问。
※ 本使用说明书中的规格因改良而发生变更，请订货时确认。
Cable coming from the plug / 从插头连接出来的电缆
Brown: Switch terminal 2 / 褐色 : 开关端子 2
Light blue: Switch terminal 4 / 浅蓝色 : 开关端子 4
control box and coming from the plug to grounding
terminal 4 of the switch case as shown in the fi gure at
left.
Install main body 2 of the switch to case 1 .
(The main body of the switch cannot be installed to the
case if it is oriented upside down.)
Attach two cable clip bands 5 supplied with the unit as
illustrated in the fi gure.
线（绿／黄）连接到开关箱的地线端子 4 上。
把开关主体 2 安装到开关箱 1 上。
（安装时请注意不要把开关主体的安装方向上下颠
倒。 ）
如图所示那样安装附属的扎线带 5 。 （2 处）
Brown
褐色
11 · 08 Printed in China
Advertisement
