Page 1
POWER SWITCH WIRING INSTRUCTIONS / 电源开关配线说明书 No.00 40113520 Connecting the power cable / 电源电缆线的连接 1) Take out main body 2 of switch from switch case 1 . 1) 从开关箱 1 上卸下开关主体 2 。 2) Make two holes, with a sharp instrument, in the cen- ter of grommet 3 located the lower part of the switch case.
Page 2
Please do not hesitate to contact our distributors or agents in your area for further information when necessary. * The description covered in this instruction manual is subject to change for improvement of the Copyright C 2011 JUKI CORPORATION commodity without notice. • All rights reserved throughout the world.