Door Alarm Eco Alarm Functions; Vacuum - Hitachi R-MX600GVTH0 Instruction Manual

Other Functions
6
Door Alarm and ECO Alarm Functions
If the door is left open for more than 1 minute, the alarm system will inform the user by the sound and digital display.
Door Alarm: Informs by Peeppeeppeep sound.
Eco Alarm Display: Indicates the door opening state on the control panel.
To Disactivate Alarm and Sound
1. Keep Touching "Quick Freezing" button for approximately
5 seconds until the sound of "Peep!" is heared.
NOTICE
● Upon shipment, the alarm and sound are set "ON".
● In case of Door Alarm, Eco Alarm Display and each button operation sound was disactivated. If we unplugging and inserting the power plug
or in the event of a power failure the refrigerator will still set the alarm and sound to "OFF".
7

Vacuum

The display switches in sequence as shown below every time the button is touched. The temperature is set to "-1°C " at default.
When in "Vacuum"
1.
operation.
lights on.
After off vacuum function,the temperature will be autometically to default ( -1
CAUTION
The "Off" indicator lamp continues to be lit during the "Off"operation. The display
energy saving, but the function that is set once will remain effective.
Lamp lights on.
Pi!
1,2,3,4,5 Seconds
Lamp lights off.
Peep!
"-1 °C"
Pi !
1. Keep Touching "Quick Freezing" button for approximately
5 seconds until the sound of "Pipi!" is heared.
Touch "Vacuum" for start
2.
Vacuum operation. " 1 °C"
lights on.
Pi !
°C )
will be turned off after about 40 seconds for
To re-activate Alarm and Sound
.
Lamp lights on.
. . . .
1,2,3,4,5 Seconds
Pipi!
Lamp lights off.
3. Touch "Vacuum" for stop
Vacuum operation. "off "
lights on.
Pi Pi !
11