Table of Contents
Advertisement
How to Use Glass Touch Panel and ECO Monitoring Sensor (Continued)
Operation
Other Functions (Continued)
"Child Lock"
You can prevent mischief of all the buttons on the control panel by children.
1. Press "Child Lock" button for 5 seconds(to lock).
Lamp lights on.
● When "Child Lock" is activated, other buttons will not be accepted even if you press, but Auto Door of the touch
Notice
operation is possible.
"Energy Saving"
Energy saving function will operate automatically as below conditions.
1. Mode "Energy Saving" ON
Lamp lights on.
● No ECO Monitoring sensor
detection.
● No door open
● No control panel operation.
● No Water/Ice Dispenser
operation.
Door Alarm and ECO Alarm Functions
If the door is left open for more than 1 minute, the alarm system will inform the user by the sound and digital display.
Door Alarm: Informs by
Eco Alarm Display: Indicates the door opening state on the control panel.
To Disactivate Alarm and Sound
1. Keep pressing "Quick Freezing" button for approximately
5 seconds until the sound of "Peep!" is heared.
Notice
● Upon shipment, the alarm and sound are set "ON".
● In case of Door Alarm, Eco Alarm Display and each button operation sound was disactivated. If we unplugging and inserting
the power plug or in the event of a power failure the refrigerator will still set the alarm and sound to "OFF".
10
PeeP!
2. Mode "Energy Saving" OFF
Lamp lights off.
● Door open.
● Control panel operation
● Water/Ice Dispenser
operation.
Peeppeeppeep
sound.
Lamp lights on.
Pi!
1,2,3,4,5 Seconds
Lamp lights off.
Peep!
2. To stop this function , press 5 seconds "Child Lock" again.
Lamp lights off.
Notice
● Mode "Energy Saving" ON will operate automatically
as below conditions finished in approximately 24 hours.
● After a long time operation of "Energy Saving" ON,
in some cases, fatty ice cream ,etc., may become soft.
● In case the compartment temperature rises up,
the operation will be back to a normal setting temporarily.
Caution
● If "Energy Saving" operation is working in high
humidity environment, dew may appear on refrigerator
surface.
To re-activate Alarm and Sound
1. Keep pressing "Quick Freezing" button for approximately
5 seconds until the sound of "Pipi!" is heared.
. . . .
1,2,3,4,5 Seconds
Pipi!
Pipi!
Lamp lights on.
Pipipipi!
Lamp lights off.
Advertisement
Table of Contents
