Disassembly Procedure - Acer Veriton 2800 Service Manual

Disassembly Procedure

This section tells you how to disassemble the system when you need to perform system service. Please also
refer to the disassembly video, if available.
CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it.
Opening the System
1. Place the system unit on a flat, steady surface.
2. Turning the housing back, turn the three screws securing the side cover and remove them.
3. Slide the side door out.
Removing the Add-On Card (AS L300 only)
1. Release the screw securing the add-on card.
2. Remove the add-on card as shown.
Removing Cables
1. Disconnect the IDE connectors from the PCI riser card. (AS L300 only)
Chapter 3 42