Wall Mount - Watchguard AP330 Hardware Manual
Hide thumbs
Also See for AP330:
- Hardware manual (27 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Wall Mount
1. Determine where the access point will be placed and mark the location for the two mounting
holes (110mm apart).
2. Drill the two mounting holes (8.1mm diameter and 26mm depth) and hammer the anchors into
the holes.
3. Screw the anchors into the holes until they are flush with the wall, then screw the included
screws into the anchors.
4. Attach the access point to the wall with the mounting screws.
Advertisement
Table of Contents
