Table of Contents
Advertisement
Removing the Heat Sink Fan Assembly
WARNING:The heat sink becomes very hot when the system is on. NEVER touch the heat sink with any metal
or with your hands.
1.
Loosen the four spring-loaded screws on the heat sink fan assembly in a diagonally opposite "X" pattern.
2.
Lift the heat sink fan assembly away from the mainboard.
3.
Lay down the heat sink fan assembly in an upright position, on top of the optical drive, as shown below,
then disconnect the fan cable from the mainboard.
26
Aspire AX1920 Service Guide
- Quick Links:
- Physical Specifications
- Memory
Hide quick links:
Advertisement
Table of Contents
