Standard Cmos Features - Acer Aspire T180 Service Manual

Standard CMOS Features

Select Standard CMOS Features from the main menu to configure some basic parameters in your system.
The following screen shows the Standard CMOS Features menu:
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 2 Master
IDE Channel 3 Master
IDE Channel 4 Master
IDE Channel 5 Master
Drive A
Video
Halt On Setting
Base Memory
Extended Memory
Total Memory
The following table describes the parameters found in this menu. Settings in boldface are the default and
suggested settings.
Parameter
Date
Time
IDE Channel 0/2/3/4/5 Master &
IDE Channel 0 Slave
Drive A
Video
Chapter 2
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Standard CMOS Features
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
Lets you set the date following the weekday-
month-day-year format
Lets you set the time following the hour-minute-
second format
Leave this item at Auto to enable the system to
automatically detect and configure IDE devices
on the channel. If it fails to find a device, change
the value to Manual and then manually configure
the drive by entering the characteristics of the
drive in the items described below.
Allows you to configure your floppy drive A.
This item defines the video mode of the system.
The motherboard has a built-in VGA graphics
system; you must leave this item at the default
value.
Wed, Jan.1 2006
0 : 54 : 28
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5 in.]
[EGA/VGA]
[All, But Keyboard]
640K
523264K
524288K
F7:Optimized Defaults
Description
Item Help
Menu Level
Change the day, month,
year and century
Options
Weekday: Sun, Mon...Sat
Month: Jan., Feb...Dec.
Day: 1 to 31
Year: 1999 to 2098
Hour: 0 to 23
Minute: 0 to 59
Second: 0 to 59
IDE Device Model Number:
Not Detected
None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
1.44M, 3.5 - inch
2.88 MB, 3.5-inch
EGA/VGA
28