Standard Cmos Features - Acer Aspire SA90 Service Manual

Standard CMOS Features

Select Standard CMOS Features from the main menu to configure some basic parameters in your system.
The following screen shows the Standard CMOS Features menu:
Date (MM:DD:YY):
Time (HH:MM:SS):
IDE Channel 0 Master
IDE Channel 0 SLave
SATA Channel 1 Master
SATA Channel 2 Master
Drive A
3 Mode
Video
Halt On
Base Memory
Extended Memory
Total Memory
The following table describes the parameters found in this menu. Settings in boldface are the default and
suggested settings.
Parameter
Date
Time
IDE Channel 0/1 Master/Slave/
SATA Channel 1/2 Master
Drive A
Chapter 2
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
[HL-DT-STDVD-ROM GDR8]
[None]
[None]
[None]
[None]
[Disabled]
[EGA/VGA]
[All, But Keyboard]
640K
457728K
458752K
:Move Enter: Select +/-/ :Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
Lets you set the date following the weekday-
month-day-year format
Lets you set the time following the hour-minute-
second format
Leave this item at Auto to enable the system to
automatically detect and configure IDE devices
on the channel. If it fails to find a device, change
the value to Manual and then manually configure
the drive by entering the characteristics of the
drive in the items described below. Please noted
that if you choose IDE Channel 2/3 Master, the
item may change to Extended IDE Drive.
This item display the status of auto detection of
SATA devices.
Allows you to configure your floppy drive A.
Sat. Jan 7 2006
22 : 36 : 36
Description
Help Item
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field
Use [+] or [-] to
configure system Date
Options
Weekday: Sun, Mon...Sat
Month: Jan., Feb...Dec.
Day: 1 to 31
Year: 1999 to 2098
Hour: 0 to 23
Minute: 0 to 59
Second: 0 to 59
IDE Device Model Number:
None
None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
1.44M, 3.5 - inch
2.88 MB, 3.5-inch
20