Advertisement
CONNECTIONS
Caution: Make all other connections before you connect the power supply
standard AC power.
1. USB Charge (5V/2A Each)
USB Charge works with all of today's latest devices
2. Cigarette Lighter
3. DC Outputs: Turn the sleeves of the red and black binding output posts
counter clockwise to expose the wire hole.
Insert the device's negative wire (usually black) into the black binding post's wire
hole, then tighten the binding post's sleeve to secure the wire in place. Insert the
device's positive wire (usually red) into the red binding post's wire hole, then
tighten the binding post's sleeve to secure the wire in place. If you are using the
banana plugs connection, insert the plugs into the terminal's jack.
4. Power ON/OFF: Set the power supply's POWER switch to ON or OFF.
Note: The binding posts' wire holes can accommodate up to 16-gauge wire.
5. Fuse Protected with Auto-Reset
6. HEAT SINK
7. AC Power Supply Cable AC110V/60Hz
www.pyramidcaraudio.com
5
Advertisement
