Technical Specifications; Software License Agreements; Certificates And Approvals - Siemens SIMATIC IFP2200 INOX MT ETH Compact Operating Instructions

Technical specifications

5.1

Software license agreements

Microsoft licenses
License fees for the pre-installed Microsoft operating system on the HMI devices are paid
directly by Siemens to the Microsoft company.
No COA label ("Certificate of Authenticity") and no other proof of license is required for the
HMI device.
Open Source Software
If available, observe the software license agreements for Open Source software on the
enclosed data carrier "Open Source Software License Conditions".
5.2

Certificates and approvals

Note
Approvals on the rating plate
The following overview provides information on possible approvals.
Only the approvals on the rating plate (Page 37) of the specific device apply.
CE marking
The devices meet the general and safety-related requirements of the following EU directives
and conform to the harmonized European standards (EN) for these devices published in the
official gazettes of the European Community and in the EU Declarations of Conformity:
• 2014/35/EU "Electrical equipment for use within certain voltage limits" (Low-Voltage
Directive)
• 2014/30/EU "Electromagnetic Compatibility" (EMC Directive)
• 2011/65/EU "Directive of the European Parliament and of the Council of 8 June 2011 on
the restriction of the use of certain hazardous substances in electrical and electronic
equipment" (RoHS Directive)
When the device has Ex approval (see nameplate below), the following also applies:
• 2014/34/EU "Equipment and protective systems intended for use in potentially
explosive atmospheres" (Directive for Explosion Protection)
IFP2200 INOX MT ETH
Compact Operating Instructions, 07/2021, A5E42185570-AD
5
33