Set Supervisor Password; Enter Password - Acer Aspire M1100 Service Manual

Set Supervisor Password

When this function is selected, the following message appears at the center of the screen to assist you in creating
a password.
Product Information
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configuration
Esc: Quit
F10: Save & Exit Setup
V02.54 (C) Copyright 1985-2004, American Megatrends, Inc.

Enter Password

Type the password, up to eight characters, and press ENTER. The password entered here overwrites any
previously entered password from CMOS memory. You will be asked to confirm the password. Type the password
again and press ENTER. You can press ESC to abort the selection.
To disable password, just press ENTER when you are prompted to enter password. A message will confirm the
password being disabled. Once the password is disabled, the system will boot and you can enter BIOS Setup
freely.
Supervisor Password has higher priority than User Password. You can use Supervisor Password when booting the
system or entering BIOS Setup to modify all settings. Also you can use User Password when booting the system
or entering BIOS Setup but can not modify any setting if Supervisor Password is enabled.
Chapter 2
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Enter Password:
Change/Set/Disable Password
PC Health Status
Frequency/Voltage Control
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
49