Change Password - Acer Aspire M1100 Service Manual

3. Enter the password to proceed. The default password is six zeros.
4. In the Acer eRecovery window, select Recovery actions and Next.
5. In the Recovery settings window, select Re-install applications / drivers and click Next.
6. Select the desired driver / application and follow the instructions on screen to re-install.
After the first launch, Acer eRecovery prepared all the needed software and may take few seconds to bring up the
software content window.

Change Password

Acer eRecovery and Acer disc-to-disc recovery are protected by a password that can be changed by users. Follow
the steps below to change the password in Acer eRecovery.
1. Boot to Window XP.
2. Press <Alt> + <F10> to open the Acer eRecovery utility.
3. Enter the password to proceed. The default password is six zero.
4. In the Acer eRecovery window, select Recovery settings and click Next.
5. In the Recovery settings window, select Password: Change Acer eRecovery password and click Next.
Follow the instructions on screen to complete the process.
16 Chapter 1