Storage Interface
Chipset:
-
2 x M.2 connectors (Socket 3, M key, type 2242/2260/2280/22110 SATA
and PCIe x4/x2 SSD support) (M2M_32G) (M2A_32G)
-
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2 SSD
support) (M2P_32G)
-
6 x SATA 6Gb/s connectors
-
Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to "1-9 Internal Connectors," for the installation notices for the PCIEX4, M.2,
Intel
Optane
®
USB
Chipset+2 ASMedia
-
1 x USB Type-C
internal USB header
-
1 x USB Type-C
-
1 x USB 3.1 Gen 2 Type-A port (red) on the back panel
Chipset+Realtek
-
2 x USB 3.1 Gen 1 ports available through the internal USB header
Chipset:
-
5 x USB 3.1 Gen 1 ports on the back panel
-
4 x USB 2.0/1.1 ports available through the internal USB headers
Internal
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
Connectors
1 x CPU fan header
1 x water cooling CPU fan header
4 x system fan headers
1 x 3 Amp fan/water cooling pump header
1 x system fan/water cooling pump header
2 x digital LED strip headers
2 x digital LED strip power select jumpers
2 x RGB (RGBW) LED strip headers
3 x M.2 Socket 3 connectors
6 x SATA 6Gb/s connectors
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB Type-C
1 x USB 3.1 Gen 1 header
2 x USB 2.0/1.1 headers
1 x Thunderbolt
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
1 x power button
1 x reset button
1 x Clear CMOS button
1 x OC button
2 x temperature sensor headers
and SATA connectors.
Memory Ready
™
USB 3.1 Gen 2 Controllers:
®
port with USB 3.1 Gen 2 support, available through the
™
port on the back panel, with USB 3.1 Gen 2 support
™
USB 3.1 Gen 1 Hub:
®
header, with USB 3.1 Gen 2 support
™
add-in card connector
™
- 11 -
Hardware Installation