Acer Power Sx Service Manual page 35

Parameter
Total Memory
1st Bank
2nd Bank
Serial Port 1
Serial Port 2
Parallel Port
PS/2 Mouse
Chapter 2
Description
Specifies the total amount of onboard memory. The
memory size is automatically detected by BIOS during
the POST. If you install additional memory, the system
automatically adjusts this parameter to display the new
memory size.
Indicates the type of DRAM installed in the DIMM 1
socket. The None setting indicates that there is no
DRAM installed.
Indicates the type of DRAM installed in the DIMM 2
socket. The None setting indicates that there is no
DRAM installed.
Shows the serial port 1 address and IRQ settings.
Shows the serial port 2 address and IRQ settings.
Shows the parallel port address and IRQ settings.
Indicates if there is a mouse connected to your system.
This is automatically detected by BIOS.
Format
Memory size in MB
DIMM type, capacity in MB
DIMM type, capacity in MB
Address, IRQ
Address, IRQ
Address, IRQ
Displays Installed if there is a
mouse detected; otherwise, it
displays None.
27