Acer TravelMate 6293 Service Manual page 35

The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings
Parameter
System Time
System Date
System Memory
Extended Memory
VGA Memory
Quiet Boot
Power on display
Network Boot
F12 Boot Menu
D2D Recovery
NOTE:The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Chapter 2
Description
Sets the system time. The hours are
displayed with 24-hour format.
Sets the system date.
This field reports the memory size of
the system. Memory size is fixed to
640MB
This field reports the memory size of
the extended memory in the system.
Extended Memory size=Total memory
size-1MB
Shows the VGA memory size. VGA
Memory size=64/128MB
Determines if Customer Logo will be
displayed or not; shows Summary
Screen is disabled or enabled.
Enabled: Customer Logo is displayed,
and Summary Screen is disabled.
Disabled: Customer Logo is not
displayed, and Summary Screen is
enabled.
Auto: During power process, the
system will detect if any display
device is connected on external video
port. If any external display device is
connected, the power on display will
be in CRT (or projector) only mode.
Otherwise it will be in LCD only mode.
Both: Simultaneously enable both the
integrated LCD screen and the
system's external video port (for an
external CRT or projector).
Enables, disables the system boot
from LAN (remote server).
Enables, disables Boot Menu during
POST.
Enables, disables D2D Recovery
function. The function allows the user
to create a hidden partition on hard
disc drive to store operation system
and restore the system to factory
defaults.
Format/Option
Format: HH:MM:SS
(hour:minute:second) System Time
Format MM/DD/YYYY (month/day/
year)
System Date
Enabled
Option: or Disabled
Auto
Option: or Both
Enabled
Option: or Disabled
Disabled
Option: or Enabled
Enabled
Option: or Disabled
27